knikbioreactors
   language   
SIP CIP Fermentor 100L

SIP CIP Fermentor 100L

  • Facebook Twitter Google+ Pinterest LinkedIn Addthis
  • Email:myd0720@126.com

 

Equipment 

Item 

Requirements and manufacturers 

5L 50L 500L

fermenter

 

Fermenter body

The size of fermenter takes in general use type as basis and The main material of the fermenter is made by 316L stainless steel. The design pressure: P(inside)= 0.3Mpa, P(interlayer)= 0.3Mpa, The polishing precision: Ra0.40.6, the ratio between diameter and height: 1:2.5

5 liter  fermenter Work volumes ranging from 2-3.5 Liters

50 liter  fermenter Work volumes ranging from 20-35 Liters

500 liter  fermenter Work volumes ranging from 200-500 Liters

Sterilization method

Auto  sterilization

Stirring system

Mechanical sealing system at the top of the fermenter; high-powered stirring oar, antifoam oar; AC electrical machine(SEW):  infinite speed variation;rpm in the 500L germ fermenter: 70~400rpm±1%rpm;, The height of the stirring oar can be adjusted, too.

Temperature detection and control

Heat by thermostatic water tank and circulate by circulating pump(Grundfos, Denmark), autocontrol (cooling water+5)~70℃±0.1℃,temperature probe(imported)

pH detection and control

2.00-12.00±0.05pH, autocontrol by adding acid and base, pH sensor (Hamilton /Mettler, Switzerland) and shielding lead (Hamilton /Mettler, Switzerland).

DO detection and control

0-150±3% displaying precision 0.1%, sensor (Hamilton /Mettler, Switzerland) and shielding lead(Hamilton /Mettler, Switzerland)

Feed control

fermenter uses peristaltic pump (Longer) to add meterials

Antifoam control

Tested by sencor and added antifoamer by peristaltic pump

Aeration detection and control

manual control ventilatory capacity, the precision of nhaler : 0.1μ, displayed by rotameter. The range of flow adjusting of  10000L germ fermenter 0~20000L/min

pressure detection and control

Manual control exhaust by diaphragm cell valve,and displayed by pressure gauge.

Pipeline and valve

The pipelines and valves which are in contact with the zymotic fluid are made by 316L stainless steel, the valves are diaphragm cell valves

Control system

BLBIO S Control System: on-site controller, the next crew for the Siemens S7-200 series PLC control system, it is a mature, stable, universal type of PLC, to suit a variety of automation applications, especially in manufacturing process control Application. Its modular, easy to implement distributed configuration and easy to master and so on, Siemens PLC control center has become a biological reaction process control implementation is economical and advanced control system, the system uses the touch screen display, on-site direct operations (menu type), all English menu and interface; also with the host computer for data transmission, data sampling and display tank, the system view of data analysis, reading settings.

10-inch LCD touch-sensitive screen as the display screen to display complete content-rich, user-friendly screen is simple, easy to operate. And disturbing each other. The control system can adapt to different range of sensors and actuators the output of the input signal with the signal anti-jamming system.

Software: Siemens S7+  FORCE  CONTORL

Data collection and control module: Siemens S200 PLC controller and data collection and control module

1. Control
Manual control: You can set the percentage of open valve or a valve opening automatic control mode: You can select continuous or PID PID control the switch sequence control: the control of all parameters can be pre-set at least 10 control section, for automatic segmentation remotely control: PC control acceptable correlation control: the dissolved oxygen can select speed, air flow rate, tank pressure, control of feeding, etc.; pH can choose to control with acid and alkali

 

2. Measurement function: can feeding, bubble enemy, such as measurement of pH
3. XY-axis to chart real progress can be any expansion and contraction of graphics display, to help the operator determine the parameters of the interaction between the effects of the fermentation process to quickly modify and adjust

4. Data Processing
1) to show that all the parameters of the trend curve analysis
2) to store, display, analyze all the historical curve parameters
3) can display all the parameters of the batch report
4) copy the data directly with the USB

 

5) data storage format is compatible with EXCEL, EXCEL platform can be to deal with
5. Controller self-protection function: to set the password, others can not modify the fermentation parameters; and the controller is not lost due to power settings for each parameter
6. Can the process control parameters, each parameter can have 10 block can be set
7. Time display of each parameter recording interval can be adjusted
8. Two parameters can be carried out with the screen settings and calibration

9. show the controller is really running against, the panel instructed the state process system, process hardware, and motion status indicator for understanding the various devices (such as peristaltic pumps, circulating pumps, heating, mixing, etc.) work status, Fault identification can be used as display
10. Each parameter of the transmission are independent modules, without disturbing each other, for easy maintenance
11.PH, DO and other parameters of control and associated controls can be adjusted

 

Email to this supplier
*Email:

Enter email or Member ID.

*Content:

Your message must be between 20-8000 characters

*Captcha:
Copyright © 2016 Knik Technology All Rights Reserved. Powered By MuYuTong
We will deal with your message in 24 hours
*Email:
*Content:
*Contacter:
*Mobile:
*Telephone:
*Skype:
*Address:
*Captcha:

Online