Models: BLBIO-1GJ BLBIO-2GJ BLBIO-3GJ BLBIO-5GJ BLBIO-7GJ BLBIO-10GJ
Total Volume(L) : 1 2 3 5 7 10
working volume(L): 0.4-0.7 0.6-1.4 1-2 2-3.5 2-5 4.5-7
Vessel Material :glass body and stainless steel lid and bottom
The high ratio: 2:1
Mixing method: Mechanical agitation John Crane mechanical seals servo motor
Sterilization method: off-site sterilization Autoclavable
Control system: Siemens PLC, industrial LCD touch computer control, parameters can be set to store, can be remotely connected to the computer through the USB interface, the data
Stirring system
Mechanical sealing system at the top of the fermenter; high-powered stirring oar, antifoam oar; AC electrical machine: infinite speed variation; rpm in the fermenter: 70~1200rpm±1%,The height of the stirring oar can be adjusted, too.
Temperature detection and control
Heat by thermostatic water tank and circulate by circulating pump(Grundfos, Denmark), autocontrol (cooling water+5℃)~65℃±0.1℃,temperature probe(US)
pH detection and control
2.00-12.00±0.05pH, autocontrol by adding acid and base, pH sensor (Mettler, Switzerland) and shielding lead (Mettler, Switzerland). fermenter is autocontrolled with peristaltic pump
DO detection and control
0-150±3% displaying precision 0.1%, sensor (Mettler, Switzerland) and shielding lead(Mettler, Switzerland)
Feed control
fermenter uses peristaltic pump (Longer) to add meterials
Antifoam control
Tested by sencor and added antifoamer by peristaltic pump
Intake control (air) :manual control rotameter
pressure detection and control
Pressure Control: Pressure meter and digital display and digital remote control,Pressure manual control
We have been providing research, test and production application compatible with the advanced fermentation equipment, and technology to stay ahead. Our Factory in China. We provide the fermentor products including : Stainless steel fermenter, Pilot combo stainless steel fermentor, glass fermentor, fermenter, Multi-Union fermenter,Multi-stage fermentation tank,Solid fermentation,and shaking Incubators
AUTOCLAVALBE GLASS FEMENTOR
(Stainless steel interlayer temperature control)
1. Suitable for the cultivation of microorganisms yeast and fungi
2. Install and play, simple operation
3. Easy to learn and use, low failure rate
4. After the installation of suitable suite, it can be applied to the cultivation of mammal animals and insects
5. Stainless steel jacket and semicircular bottom jacket, the embedded heat exchange and series connection thermal baffle is advantageous to control the temperatures of the hot and cold water al well as the rapid heat transfer.
6. Tanks of 1L,2L,3L,5L,7L and 10L working capacity are available to exchange fostering tanks
Material and brand of key components
No.
|
Key component
|
Material and brand
|
Quantity
|
1
|
Vessel system
|
The cylinder designed by our company uses stainless steel combined with glass partly. Stainless steel:Glass: borosilicate glass. The framework is advanced.
|
1
|
2
|
Buncher
|
Panasonic, Japan
|
1
|
3
|
Speed regulator
|
Panasonic, Japan
|
1
|
4
|
Solenoid valve
|
Germany
|
1
|
5
|
Aeration filter
|
0.2μm, SARTORIUS, Germany
|
8
|
6
|
Breathing filter
|
0.2μm, SARTORIUS, Germany
|
4
|
7
|
pH electrode
|
Hamilton /Mettler-Toledo,Switzerland
|
1
|
8
|
DO electrode
|
Hamilton /Mettler-Toledo, Switzerland
|
1
|
9
|
Peristaltic pump
|
Longer
|
4
|
l Working environment:
l Up to the internal &external environment required by fermentation
l Up to the technic-required water supply. The temperature of cooling water is at least 5℃ below the temperature of fermentation
l Power requirement: AC220/2KW
l Compressed air: Primarily-processed compressed air, relative humidity:≤60%,ventilatory capacity is accorded to the technics.