Models 0.1GC-4 0.2GC-4 0.3GC -4 0.5GC-4 0.7GC-4 1GC-4
working Volume 0.05L 0.1 L 0.2L 0.3L 0.6 L 0.7 L
Load Proportion 65-80% of total volume, 70% optimum
Vessel Material glass body and stainless steel lid
The high ratio: 2:1
Mixing method: Magnetic Drive from bottom, without mechanical seal
Sterilization method: off-site sterilization Autoclavable
Control system: Siemens PLC, industrial LCD touch computer control, parameters can be set to store, can be remotely connected to the computer through the USB interface, the data
Stirring system
high-powered stirring oar, antifoam oar; AC electrical machine: infinite speed variation; rpm in the fermenter: 70~1200rpm±1%,The height of the stirring oar can be adjusted, too.
Temperature detection and control
Heat by thermostatic water tank and circulate by circulating pump(Grundfos, Denmark), autocontrol (cooling water+5℃)~65℃±0.1℃,temperature probe(US)
pH detection and control
2.00-12.00±0.05pH, autocontrol by adding acid and base, pH sensor (Mettler, Switzerland) and shielding lead (Mettler, Switzerland). fermenter is autocontrolled with peristaltic pump
DO detection and control
0-150±3% displaying precision 0.1%, sensor (Mettler, Switzerland) and shielding lead(Mettler, Switzerland)
Feed control
fermenter uses peristaltic pump (Longer) to add meterials
Antifoam control
Tested by sencor and added antifoamer by peristaltic pump
Intake control (air) :manual control rotameter
pressure detection and control
Pressure Control: Pressure meter and digital display and digital remote control, pressure control
0.3-1 LITER MINI BIOREACTOR
- Suitable species for early screening
- Greatly save time and cost of materials
- Working volume of tanks are from 0.3L to 0.7L
- Tanks and interchangeable training
- Through low ventilation mode can additional match mass flowmeter
- And pure oxygen bypass to enhancing the DO function、
- Made of presterilized polycarbonate
- 2L working volume
- Single-walled for operation with electric heating blanket
- For cell culture applications
- Two three-blade impellers and L-sparger
- Three top plate ports
- Three ports with dip tubes for addition or harvest
- Three 12-millimeter ports with a 13.5 Pg (20.4 mm OD) thread for installation of conventional sensors
DIFFERENT PRODUCTS NAME
Fermenter/Glass Fermentor /Bioreactor/GMP Fermentation tank/Pharmaceutical fermentation/Situ fermenter/Industry pilot fermentor,Microbial fermenter,Glass fermenter,Stainless steel fermenter,Multi-stage fermenter,Multi-couplet stainless fermenter,Airlift fermenter,Plant cell bioreactor(illumination),Animal cell bioreactor,Solid fermentor,Enzyme Bioreactor,Vaccine Bioreactor,The bottom agitation bioreactor,Advanced Fermentor(weighing),Production fermentation system,GMP standard fermentation tank,Mixing tank,Exhaust analyzer,Advanced analysis software, Algae photo bioreactor,light fermenter, fermenter tank, Stainless steel fermentation tank.
一、
No.
|
Key component
|
Material and brand
|
Quantity
|
1
|
Vessel system
|
The cylinder designed by our company uses stainless steel combined with glass partly. Stainless steel:Glass: borosilicate glass. The framework is advanced.
|
1
|
2
|
Buncher
|
Panasonic, Japan
|
1
|
3
|
Speed regulator
|
Panasonic, Japan
|
1
|
4
|
Solenoid valve
|
Germany
|
1
|
5
|
Aeration filter
|
0.2μm, SARTORIUS, Germany
|
8
|
6
|
Breathing filter
|
0.2μm, SARTORIUS, Germany
|
4
|
7
|
pH electrode
|
Hamilton /Mettler-Toledo,Switzerland
|
1
|
8
|
DO electrode
|
Hamilton /Mettler-Toledo, Switzerland
|
1
|
9
|
Peristaltic pump
|
Longer
|
4
|
l Working environment:
l Up to the internal &external environment required by fermentation
l Up to the technic-required water supply. The temperature of cooling water is at least 5℃ below the temperature of fermentation
l Power requirement: AC220/2KW
l Compressed air: Primarily-processed compressed air, relative humidity:≤60%,ventilatory capacity is accorded to the technics.